Skip to main content
Custom print
Download Original PDF

2. Products

No: 69427/149 Date(g): 22/7/2019 | Date(h): 20/11/1440

Effective from 2019-07-22 - Jul 21 2019
To view other versions open the versions tab on the right

General
 
 A.Cameras shall be Full HD IP-based and comply with established network and video standards.
 
 B.Cameras shall be powered by the switch utilizing the network cable. Power injectors (midspans) shall be provided by the contractor when required for proper operation.
 
 C.Cameras shall be fully supported by an open and published API (Application Programmers Interface), which shall provide necessary information for integration of functionality into third party applications.
 
 D.Cameras shall comply with relevant ONVIF profile as defined by the ONVIF Organization.
 
Video Surveillance Schedule
 
 A.Camera types listed below describing various resolutions, form-factor and features shall be supplied by a single camera manufacturer for the video surveillance system.
 
Video Surveillance Cameras
 		  
 A.Fixed 2 MP camera for IP
 		 
1.The fixed network camera shall meet or exceed the following design specifications:
 		  
 a)The camera shall operate on an open source; Linux-based platform and including a built-in web server.
 		 
 b)The camera shall be equipped with an IR-sensitive progressive scan megapixel sensor.
 		 
 c)The camera shall provide a removable IR-cut filter, providing day/night functionality.
 		 
 d)The camera shall provide remote focus functionality.
 		 
 e)The camera shall provide local video storage utilizing a microSD/microSDHC/microSDXC memory card expansion.
 		 
 f)The camera shall be manufactured with an aluminium casing.
 		 
 g)The camera shall be equipped with a SFP slot for fibre network connectivity.
 		 
 h)The camera shall incorporate network redundancy functionality.
 		 
 i)The camera shall be designed to be compatible with different lenses from the manufacturer, including:
 		 
  1.24 mm fixed lens, f/2.8
 
  2.35 mm fixed lens, f/2
 
  3.50 mm fixed lens, f/1.4
 
  4.85 mm fixed lens, f/1.2
 
  5.100 mm fixed lens, f/2.8
 
  6.10-22 mm varifocal lens, f/3.5-4.5
 
  7.55-250 mm varifocal lens, f4-5.6
 
  8.70-200 mm varifocal lens, f/2.8
 
2.The fixed camera shall meet or exceed the following performance specifications:
 		  
 a)Illumination. The camera shall meet or exceed the following illumination specifications:
 		 
  •Colour: 0.2 lux F1.2
 
  •B/W: 0.001 lux F1.2
 
 b)Resolution
 		 
  •The camera shall be designed to provide video streams in resolutions up to 1280x720 (HD 720p) at a minimum of 12 frames per second using H.264 or Motion JPEG.
 
  •The camera shall be designed to provide up to 4 individually cropped out view areas
 
  •The camera shall support video resolutions including:
 
   i.1280x720 (HDTV 720p) or better
 		  
 c)Encoding
 		 
  •The camera shall support the following video encoding algorithms:
 
   i.Support H.264 with automatic scene adaptive bitrate control
 		  
   ii.MPEG 4
 		  
  •The camera shall provide independently configured simultaneous H.264 and Motion JPEG streams.
 
  •The camera shall in H.264 support Variable Bit Rate (VBR) for video quality adapted to scene content. To protect the network from unexpected bit rate spikes the camera shall support Constant Bit Rate (CBR) or Maximum Bit Rate (MBR).
 
  •The camera shall provide configurable compression levels.
 
  •Support standard baseline profile H.264 with motion estimation.
 
  •Support motion estimation in H.264/MPEG-4 Part 10/AVC.
 
  •The camera shall for its H.264 implementation support scene adaptive bitrate control with automatic dynamic Region of Interest (ROI) to reduce bitrate in unprioritized regions in order to lowering bandwidth and storage requirements.
 
 d)Transmission
 		 
  •The camera shall allow for video to be transported over:
 
   i.HTTP (Unicast)
 		  
   ii.HTTPS (Unicast)
 		  
   iii.RTP (Unicast & Multicast)
 		  
   iv.RTP over RTSP (Unicast)
 		  
   v.RTP over RTSP over HTTP (Unicast)
 		  
  •The camera shall support Quality of Service (QoS) to be able to prioritize traffic
 
  •Cameras must contain open API and support multi streaming
 
 e)Image
 		 
  •The camera shall incorporate Automatic and Manual White Balance.
 
  •The camera shall incorporate an electronic shutter operating in the range of 1/8000 to 1 s.
 
  •The camera shall support manually defined values for:
 
   oColour level
 		  
   oBrightness
 		  
   oSharpness
 		  
   oContrast
 		  
  •The camera shall incorporate a function for optimization of low light behaviour.
 
  •The camera shall allow for rotation of the image.
 
 f)User Interface
 		 
  •Web server
 
   i.The camera shall contain a built-in web server making video and configuration available to multiple clients in a standard operating system and browser environment using HTTP, without the need for additional software.
 		  
   ii.Optional components downloaded from the camera for specific tasks, e.g. Active X, shall be signed by an organization providing digital trust services, such as Verisign, Inc.
 		  
  •Language Specification
 
   i.The camera shall provide a function for altering the language of the user interface and shall include support for at least 10 different languages.
 		  
  •IP addresses
 
   i.The camera shall support both fixed IP addresses and dynamically assigned IP addresses provided by a Dynamic Host Control Protocol (DHCP) server.
 		  
   ii.The camera shall allow for automatic detection of the camera based on UPnP and Bonjour when using a PC with an operating system supporting this feature.
 		  
   iii.The camera shall provide support for both IPv4 and IPv6.
 		  
 g)Event functionality
 		 
  •The camera shall be equipped with an integrated event functionality, which can be trigged by:
 
   i.Video Motion Detection
 		  
   ii.Audio Detection
 		  
   iii.Live Stream Accessed
 		  
   iv.Camera tampering
 		  
   v.Manual Trigger/Virtual Inputs
 		  
   vi.PTZ functionality
 		  
   vii.External input
 		  
   viii.Embedded third party applications
 		  
   ix.Edge storage disruption detection
 		  
  •Response to triggers shall include:
 
   i.Send notification, using HTTP, HTTPS, TCP, SNMP trap or email
 		  
   ii.Send images, using FTP, HTTP, HTTPS, network share or email
 		  
   iii.Send video clip, using FTP, HTTP, HTTPS, network share or email
 		  
   iv.iv. Send SNMP trap message
 		  
   v.Recording to local storage and/or network attached storage
 		  
   vi.Activating external output
 		  
   vii.Play audio clip
 		  
   viii.PTZ control functionality
 		  
   ix.Day/Night vision mode
 		  
   x.Text Overlay
 		  
  •The camera shall provide memory for pre-& post alarm recordings.
 
 h)Edge storage
 		 
  •The camera shall support continuous and event-controlled recording to:
 
   i.Local memory added to the cameras microSD-card slot
 		  
   ii.Network attached storage, located on the local network
 		  
  •The camera shall be able to detect and notify Edge storage disruptions.
 
 i)Protocol
 		 
  •The camera shall incorporate support for at least the following: IPv4/v6, HTTP, HTTPS, SSL/TLS, QoS Layer 3 DiffServ, TCP, ICMP, SNMPv1/v2c/v3 (MIB-II), RTSP, RTP, UDP, IGMP, RTCP, SMTP, FTP, DHCP, UPnP, ARP, DNS, DynDNS, SOCKS, SSH, NTP, CIFS/SMB, Bonjour.
 
  •The Simple Mail Transport Protocol (SMTP) implementation shall include support for SMTP authentication.
 
 j)Text overlay
 		 
  •The camera shall:
 
   i.Provide embedded on-screen text with support for date & time, and a customer-specific text, camera name, of at least 45 ASCII characters.
 		  
   ii.Provide the ability to apply privacy masks to the image.
 		  
   iii.Allow for the overlay of a graphical image, such as a logotype, into the image.
 		  
 k)Security
 		 
  •The camera shall support the use of HTTPS and SSL/TLS, providing the ability to upload signed certificates to encrypt and secure authentication and communication of both administration data and video streams.
 
  •The camera shall provide centralized certificate management, with both pre-installed CA certificates and the ability to upload additional CA certificates. The certificates shall be signed by an organization providing digital trust services.
 
  •The camera shall support IEEE 802.1X authentication.
 
  •The camera shall provide support for restricting access to pre-defined IP addresses only, so-called IP address filtering.
 
  •The camera shall restrict access to the built-in web server by usernames and passwords at three different levels.
 
 l)API support
 		 
  •The camera shall be fully supported by an open and published Application Programmers Interface (APi), which shall provide necessary information for integration of functionality into third party applications.
 
  •The camera shall conform to ONVIF profile G as defined by the ONVIF Organization.
 
  •The camera shall conform to ONVIF profile S as defined by the ONVIF Organization.
 
 m)Embedded applications
 		 
  •The camera shall provide a platform allowing the upload of third party applications into the camera.
 
 n)Installation and maintenance
 		 
  •The camera shall be supported with Windows-based management software which allows the assignment of IP addresses, upgrade of firmware and backup of the cameras' configuration.
 
  •The camera shall support the use of Simple Network Management Protocol (SNMP)-based management tools according to SNMP v1, 2c & 3 / MIB-II.
 
  •The camera shall allow updates of the software (firmware) over the network, using FTP or HTTP.
 
  •The camera shall provide the ability to perform remote focus adjustment.
 
  •The camera shall provide the ability to apply a rectangle of customer-defined number of pixels to the image, which can be used as a pixel counter identifying the size of objects in number of pixels.
 
  •The camera shall accept external time synchronization from an NTP (Network Time Protocol) server.
 
  •The camera shall store all customer-specific settings in a non-volatile memory that shall not be lost during power cuts or soft reset.
 
  •The camera shall incorporate a software-controlled functionality for network redundancy.
 
 o)Access log
 		 
  •The camera shall provide a log file, containing information about the 250 most recent connections and access attempts since the unit's latest restart. The file shall include information about the connecting IP addresses and the time of connecting.
 
  •Provide a connection list of all currently connected viewers. The file shall include information about connecting IP address, time of connecting and the type of stream accessed.
 
 p)Camera diagnostics
 		 
  •The camera shall be equipped with LEDs, capable of providing visible status information. LEDs shall indicate the camera's operational status and provide information about power, communication with receiver, the network status and the camera status.
 
  •The camera shall be monitored by an overwatch functionality, which shall automatically re-initiate processes or ultimately attempt to restart the unit if a malfunction is detected.
 
  •The camera shall send a notification when the unit has been re-booted, and all services are initialized.
 
 q)Hardware interfaces
 		 
  •Network interface
 
   i.The camera shall be equipped with one 100BASE-TX/1000BASE-T PoE Fast Ethernet-port, using a standard RJ45 connector and shall support auto negotiation of network speed and transfer mode (full and half duplex).
 		  
   ii.b. The camera shall be equipped with one SFP connector for SFP fibre module (100/1000 Mbps).
 		  
  •Serial interface
 
   i.The camera shall be equipped with one RS-485/422 serial port.
 		  
  •Inputs/Outputs
 
   i.The camera shall be equipped with two configurable I/O ports, accessible via a removable terminal block. These inputs/outputs shall be configurable to respond to normally open (NO) or normally closed (NC) dry contacts. The output shall be able to provide 12 V DC, 50 mA.
 		  
  •Power
 
   i.The camera shall be equipped with a removable terminal block providing connectivity for external power.
 		  
 r)Enclosure
 		 
  •The camera shall be manufactured with an aluminium casing.
 
 s)Power
 		 
  •Power over Ethernet Plus IEEE 802.3at Type 2 Class 4
 
   i.Max: 25.5 W
 		  
   ii.Typical: 13.1 W
 		  
  •20- 28 V DC
 
   i.Max: 18.6 W
 		  
 t)Environmental
 		 
  •The camera shall operate in a temperature range of -10 °C to +60°C & in a humidity range of 10-95% RH (non-condensing).